Daco DTD250 Bench Top Rotary Die Cutter

The Daco DTD 250 bench top rotary die cutter is a cost effective solution to blank / plain label converting with a production speed of 150m/minute.  The rotary die cutter is available with either one or two rotary die stations, rotary slitting and independent tension control for the unwind and rewind.  Many DTD250 rotary die cutters have been installed at clients who use them to produce plain labels for the growing thermal transfer market.

The rotary die cutter can also be used as a slitter rewinder for the finishing of pre-printed labels by removing the rotary die.

• Unwind  
• Maximum unwind diameter: 450mm (18")
• 76mm (3") mechanical mandrel
• Pneumatic brake with independent regulator and gauge
• Splice Table - Makes web splicing easier and quicker.  
• Die Station  
• 153 - 406 (6"-16") die repeats.
• Rotometrics through hardened anvil - 84T - 10.5" repeat.
• Gearing - 1/8 cp, 20 degree pressure angle.
• A driven capstan roller with adjustable tension control ensures reliable matrix stripping, enabling high speed running even if the matrix rewind becomes unstable.
• Matrix / Waste Rewind - 400mm (15.75") diameter with fully adjustable tension control.
• 76mm (3") mechanical mandrel for waste rewind.
• Draw Head
• Silicone nip roller against a driven draw roller.
• The silicone nip roller does not allow labels to attach themselves to it reducing down time.
• Fully adjustable to allow for different label stocks.
• The draw roller is driven by a 1.5Kw (2 hp) motor.
• Slitting
• 3 quick set rotary scissor slitting knives (shear knife).
• Minimum slit width: 13mm (0.51")
• Lateral knife adjustment: +/- 8mm (0.31")
• Removable interlock cutter guard for easy access to the slitting knives and anvils.
• Rewind
• 1 Product rewind
• Maximum rewind diameter: 360mm (14")
• 76mm (3") air mandrel
• Pneumatic clutch with independent regulator and gauge
• The mandrels are quick change.
• Labels in / labels out rewinding
• Count Facility
• Labels
• Linear - metres
• Programmable auto slow down and stop when the count is reached.
• Speed - 150 metres / minute - 492 feet / minute  - dependent on material
• Conforms to CE regulations and all circuits use dual channel safety switches, which are continuously monitored using a certified safety relay.

• Additional rotary die station - for perforating / sprocket punching (does not include matrix rewind)
• Sheeting station with shingle conveyor
• Laminating - self wound or with carrier
• Re-register die station (die cut to register)
• Electronic web guide with an ultrasonic sensor
• Semi automatic 3 spindle turret rewinder with auto roll ejection
• Lateral knife separation (rotary slitting)
• Removable anvil with support roller - enables back cutting and sprocket punching
• Matrix stripping bar
• Twin product rewinds
• Air mandrels - 25 to 76mm (1 to 3")
• Rotometrics RD scorer - enables edge trim to be wound with the waste matrix
• Rotometrics die pressure gauges
• Pneumatic web clamps for splice table
• Razor slitting - with on the run lateral adjustment
• Additional rotary slitting knives
• Magnetic die cylinders
• Die adaptors to utilise existing tooling - Edale, KDO, Dataply & Mark Andy (others available upon request)

Download a PDF format brochure

Daco Solutions now have a total solution to plain label production.  For the small runs, we have the table top Daco DTD250 and the Daco 'D' 250 / 330 for the medium to long runs.  For the longer run and high volume we have the Daco DSI 330 /410 and with non-stop full automation we have the Daco TD - a turret rewinder with a 1m (40") unwind, either one or two rotary die stations, core and tail gluing with automatic roll ejection.

Daco Solutions Limited
Unit 2, Oldbeck Road, Beverley,
East Yorkshire, HU17 0JW, UK
Tel: 01482 860288 International: +44 1482 860288
Fax: 01482 880942 International: +44 1482 880942
Email: Sales Department