Machines d’occasion
Daco SR350 Label Slitter Rewinder
Unwind
- Maximum unwind diameter: 700mm (27.5″)
- 76mm (3″) diameter air shaft
- Merobel electromagnetic particle brake
- Automatic taper tension control
- End of roll function – The user can program the roll end diameter – slowdown and/or stop – The system does not use any roll followers or external sensors that can be damaged at roll changes. The diameter is programmed from the touch screen operator interface.
- Web up – the operator can, at the touch of a button on the touch screen operator interface, release the unwind brake to allow for easier webbing up of the machine.
Splicing Table
- 700mm (27.5″) inspection area prior to web guiding and slitting.
- Adjustable splicing facility.
- Pneumatic web clamps.
- Tape dispenser.
BST electronic web guide.
- Ultrasonic sensor – enables guiding of opaque and clear materials.
- Adjustable web guide sensor.
- +/- 25mm (1″) correction.
Draw Head
- Quick release pneumatically operated nip roller against a driven draw roller.
- The silicone nip roller does not allow labels to attach themselves to it, reducing downtime.
- Fully adjustable to allow for different label stocks.
- The draw roller is driven by a 1.5Kw (2 hp) motor.
Slitting
- 3 slitting knives
- Minimum slit width 13mm (0.51″)
- Lateral knife adjustment +/- 8mm (0.31″)
- Razor slitting with 3 razor knives
- Lateral knife adjustment of razor slitting
- Interlocked cutter guard
Rewind
- 1 Product rewind.
- Maximum rewind diameter: 360mm (14″).
- 76mm (3″) diameter with quick change air shaft
- Automatic taper tension control
- Servo driven rewind
- Labels in / labels out rewinding
- Note: Prepared to accept a second rewind and can be upgraded prior to sale.
Count Facility
- Labels
- Linear – metres & feet
- Total count
- Batch count
- Auto calculation of slow down and stop irrelevant of web speed.
- TLC – Total length count until reset by the operator.
Colour Touch Screen Operator Interface
- Highlights machine status, error messages and warnings
- Counting options
- Tension settings
- Job storage for easy & quick job set ups – 100 job capacity
Speed – 250 metres / minute – 820 feet / minute – dependent on material.
Year Of Manufacture: December 2014
Serial Number: 14120299
Daco DF350SRD Digital Converting and Finishing Press
The machine has never been used and is currently located at a client in the USA.
Web Width
- Maximum web width: 350mm (13.75″)
- Minimum web width: 200mm (8″)
Unwind
- Maximum unwind diameter: 600mm (23.6″).
- 76mm (3″) diameter air shaft.
- Merobel electromagnetic particle brake.
- End of roll function – The user can program the roll end diameter – slowdown and/or stop – The system does not use any roll followers or external sensors that can be damaged at roll changes. The diameter is programmed from the touch screen operator interface.
- Web up – the operator can, at the touch of a button on the touch screen operator interface, release the unwind brake to allow for easier webbing up of the machine.
BST Electronic Web guide
- Ultrasonic sensor – enables guiding of opaque and clear materials.
- Adjustable web guide sensor.
- +/- 25mm (1″) correction.
- Integral splice table with pneumatic interlocked web clamps.
- Tape dispenser for splicing
Servo Driven Semi-rotary Die Cutting Station
- Die-cut to register servo drive system – with an accuracy of 0.25mm (0.010″).
- 176T (22″) magnetic die cylinder for semi-rotary applications.
- Semi-rotary cutter repeat lengths: 50-457mm (2″-18″).
- Full rotary cutter repeat lengths: 203-558mm (8″-22″).
- Through hardened anvil – 120T – 15″ repeat.
- Precision ground 20mm (0.78″) thick die plates.
- Gearing – 1/8 cp, 20-degree pressure angle.
- Lateral die adjustment.
- Fully adjustable driven capstan roller.
- Matrix / Waste Rewind – 600mm (23.6″) diameter.
- 76mm (3″) mechanical mandrel for waste rewind.
Draw Head
- Pneumatically operated silicone nip roller against a driven draw roller.
- The silicone nip roller does not allow labels to attach themselves to it, reducing downtime.
- Fully adjustable via a regulator and gauge.
- On / off feature to allow for easy webbing up of the machine.
- Interlocked so that the machine can not be started with the nip roller off.
Slitting
- 3 rotary scissor slitting knives (shear knife).
- Minimum slit width: 13mm (0.51″).
- Lateral knife adjustment: +/- 8mm (0.31″).
- Removable interlocked cutter guard.
- Dual knife box configuration to allow razor slitting to be fitted.
Product Rewind
- 1 Product rewind
- Max rewind diameter: 600mm (23.6″).
- 76mm (3″) diameter air shaft.
- Servo driven.
- Automatic taper tension control.
Count Facility
- Labels
- Linear – metres & feet
Colour touch screen HMI operator interface
- Highlights machine status, error messages and warnings
- Counting options
- Tension settings
- Job storage allows for easy & quick job setups – 100 jobs
Maximum Web Speed
- Semi-rotary 80m/minute (262 feet/minute) – dependent on plate size
- Full rotary 175m/minute (575 feet/minute) – dependent on material
Modem connection for machine diagnostics & software upgrades
Run Hour Meter
Solid construction – built on a 3mm (0.118″) cabinet with a precision ground steel 16mm (0.62″) main plate.
Optional Equipment Fitted
RotoMetrics Hydra Jacks – die pressure gauges, quick release (per die station) – modified guarding
RotoMetrics MaxLyte 176T magnetic semi-rotary die cylinder
DBS-350ES back scorer – 2 knife holders (for edge trimming & winding with waste)
Foot pedal to jog machine (assists in webbing up the machine)
Bottom product rewind with 76mm (3”) air mandrel
Laminating station – laminate with a carrier – carrier rewind
Laminating silencer
Waste Lay-on roller
