Подержанное оборудование

Daco PLR350 Semi-Automatic Turret Rewinder


Web width 350mm

  • Maximum unwind diameter: 700mm (27.5″)
  • 76mm (3″) air mandrel
  • Merobel electromagnetic particle brake
  • Automatic taper tension control
  • End of roll function – The user is able to program the roll end diameter – slowdown and/or stop – The system does not use any roll followers or external sensors that can be damaged at roll changes. The diameter is programmed from the touch screen operator interface.
  • Web guide
    • BST electronic web guide.
    • Ultrasonic sensor – enables guiding of opaque and clear materials.
    • Integral splice table with pneumatic web clamps.
    • Adjustable web guide sensor.
    • +/- 25mm (1″) correction.
  • Draw Head
    • Silicone nip roller against a driven draw roller.
    • The silicone nip roller does not allow labels to attach themselves to it reducing down time.
    • Fully adjustable to allow for different label stocks.
    • The draw roller is driven by a 1.5Kw (2 hp) motor.
  • Slitting
    • 3 quick set rotary scissor slitting knives (shear knife).
    • Minimum slit width: 13mm (0.51″)
    • Lateral knife adjustment: +/- 8mm (0.31″)
    • Removable interlocked cutter guard for easy access to the slitting knives and anvils.
  • Turret Rewind – 3 Position
    • Max rewind diameter: 250mm (10″)
    • Merobel electromagnetic particle clutch.
    • Automatic taper tension control.
    • Adjustable core positioning device – ensures accurate loading of cores onto the mandrel.
    • Automatic roll ejection system – enables easy removal of the finished rolls by the operator
  • Count Facility
    • Labels
    • Linear – metres
    • Programmable auto slow down and stop when the count is reached
  • Colour Touch Screen Operator Interface
    • Highlights machine status, error messages and warnings
    • Counting options
    • Tension settings
  • Speed – 150 metres / minute – 492 feet / minute – dependent on material

25mm air mandrels
44mm air mandrels
76mm air mandrels
Year Of Manufacture: September 2012
Serial Number: 12090237
The machine will be available middle of October 2018 and can be seen in production.

Daco Combi 330 Fully Automatic Turret Rewinder


Inline & Off-line Operation

Web width: 330mm (13”)

Maximum unwind diameter: 700mm (27.5”)

76mm (3”) air shaft

Programmable end of roll

Merobel electronic brake

Taper tension control

Splice table with pneumatic interlocked web clamps

Automatic electronic web guide

Adjustable web guide sensor

3 spindle turret rewind

350mm (13.75”) maximum rewind diameter

Taper tension control

3 x 76mm (3”) air mandrels

Adjustable core positioning stop

Automatic roll eject system complete with roll collection chute

Hot melt core gluing system: 5 glue transfer wheels

The glue bath does not need to be removed from the machine to add or remove glue transfer wheels.

Hot melt tail gluing device

Rotary scissor slitting

3 slitting knives

Knife separation

Allows for easy setting of the knife and anvil with the web in place.  Does not require costly off machine setting tools.

Minimum slit width: 16mm (0.62″)

Lateral knife adjustment: +/- 5mm (0.196”)

Maximum web speeds

Offline mode up to 220 metres/minute

Inline mode up to 150 metres/minute

25-38mm (1” – 1.5”) mandrels 100 m/minute

Fastest cycle time: 20 seconds / 3 cycles per minute

Count units: Labels / Metres / Feet

HMI operator interface

Shows machine status and system messages (interlocks not met etc)

Counting options

Tension settings

Allows for easy and quick jobs set ups

3 x 25mm (1”) air mandrels (including ejector plate)

3 x 38mm (1.5”) air mandrels (including ejector plate)

3 x 44mm air mandrels (including ejector plate)


Air requirements: 80 psi, 1 cfm

Electrics: 220-240 volts, single phase, 50 / 60 Hz, 16 amp


Year of manufacture: 2003

Availability: Immediately

Требуется помощь в производстве этикеток? Узнайте о предлагаемых нами вариантах сегодня!

Получить расценки Контакты

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.