Daco SVT350 Turret Rewinder Module

The Daco SVT series servo driven inline 350 turret rewinder is a very flexible converting machine. The 4 spindle turret offers quick change over times, which coupled with a touch screen HMI operator interface makes the machine both interactive and user friendly.


The Daco SVT350 modular servo driven turret rewinder is a very flexible converting machine. The 4 spindle turret offers quick change over times, which coupled with a colour touch screen HMI operator interface makes the machine both interactive and user friendly.

The operator can select from either length or a given number of labels per roll and the machine will then automatically cut and transfer the web to the cores without stopping.

The Daco SVT utilises a unique double sided tape system (patent pending) for attaching the web to the cores, and the finished rolls are closed using a label printed by an on-board thermal transfer printer. This totally eliminates the need for expensive and complicated hotmelt gluing systems which often cause problems for both machine operators and end users. Electronic job storage coupled with an intuitive touch screen control and minimal mechanical settings makes the machine very simple to setup and operate.

There is a host of optional equipment which enables you to specify a very adaptable converting line both now and in the future because of it modular construction.


  • Web width: 350 mm (13.75”)
  • Unwind
    • Maximum unwind diameter: 700mm (27.5″)
    • 76mm (3″) air mandrel
    • Electromagnetic particle brake
    • Automatic taper tension control
    • End of roll function – The user is able to program the roll end diameter – slowdown and/or stop – The system does not use any roll followers or external sensors that can be damaged at roll changes. The diameter is programmed from the touch screen operator interface.
  • Web guide
    • BST electronic web guide.
    • Ultrasonic sensor – enables guiding of opaque and clear materials.
    • Integral diagonal splice table with pneumatic web clamps.
    • Adjustable web guide sensor.
    • +/- 25mm (1″) correction.
  • Slitting
    • 3 quick set rotary scissor slitting knives (shear knife).
    • Minimum slit width: 13mm (0.51″)
    • Lateral knife adjustment: +/- 8mm (0.31″)
    • Removable interlocked cutter guard for easy access to the slitting knives and anvils.
  • Servo driven 4 spindle turret rewind
    • Max rewind diameter: 340mm (13.38″)
    • 50mm (2”) minimum roll diameter
    • Closed loop tension control
    • 4 x 76mm (3″) air mandrels (or 4 of customer choice)
    • Adjustable core positioning stop – ensures accurate loading of cores onto the mandrel.
    • Automatic roll eject system complete with roll eject chute – enables easy removal of the finished rolls by the operator.
  • Print and apply label applicator to close the finished roll with a label.
    • A Toshiba Tec thermal transfer printer can print data to the roll closure labels. The printed labels are collected onto a vacuum head and applied to the finished rolls.  The label closure data is programmable from the machines touch screen.
  • Count units: Labels / Metres / Feet
  • Maximum web speed 175m/minute (575 feet/minute) 
  • Colour touch screen HMI operator interface
    • Highlights machine status & error messages
    • Counting options
    • Tension settings
    • Job storage allows for easy & quick job set ups – 100 jobs
  • 7 web dividers
  • Durable powder coated cabinet and main plate


  • Modular U350L 1m (40″) unwind module
    • Cantilevered design, 76mm (3″) diameter air shaft, roll lift
  • Modular U350 762mm (30″) unwind module
    • Cantilevered design, 76mm (3″) diameter air shaft.
  • Daco DM350 Die Cutting Module
    • Rotary die station – Servo driven – with stripping & matrix rewind
      Cutter repeat lengths: 203-457mm (8″-18″)
      Fixed RotoMetrics through hardened anvil – 105T – 13.125″ repeat.
      Gearing 1/8cp 20 degree pressure angle
      76mm (3″) mechanical mandrel: For matrix rewind
      Maximum matrix rewind diameter: 609mm (24”)
  • Sensor & software upgrade for die cut to register applications
  • Air assisted turn bar
  • Removable anvil with support roller
  • Additional rotary die station (no waste rewind or stripping)
  • Matrix stripping & rewind for second die station
  • Daco DBS back scorer – enables edge trim to be wound with the waste matrix
  • RotoMetrics Hydra Jack die pressure gauges.
  • Foot pedal to jog the machine (assists in webbing up the machine)
  • RotoMetrics magnetic die cylinders
  • Air mandrels – 25 to 76mm (1 to 3″)
  • Modem connection for machine diagnostics & software upgrades
  • Flexographic print station
  • UV Inkjet systems

Video / Galleria

Documenti sui prodotti

Non sono attualmente disponibili documenti

Serve aiuto per la conversione di etichette? Lasciateci illustrare le nostre soluzioni oggi!

Ricevi una quotazione Contattaci

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.