Daco 'S' Slitter Rewinder

The Daco 'S' slitter rewinder is a cost effective and simple to use label slitting and rewinding machine.

The machines compact size and short web path keeps wastage to a minimum, the silicon covered nip drive roller helps to keep down time to a minimum as labels can not attach themselves to the roller.  The Daco 'S' slitter rewinder has independent control of both the unwind and rewind tensions.  The machine utilises rotary slitting with on the run lateral adjustment is fitted as standard and a splice table makes web splices both simple and quick.

An E & L electronic web guide with an ultrasonic sensor ensures that the finished rolls are perfectly slit and rewound.

Pneumatic airshafts for both unwind and rewind means that changing the rolls could not be simpler.

• Web widths 250mm (10"), 330mm (13")& 410mm (16")

• Unwind
• Maximum unwind diameter: 700mm (27.5")
• 76mm (3") air mandrel
• Merobel electromagnetic particle brake
• Taper tension control - No roll-followers or external sensors to be adjusted or maintained.
• Splicing Table
• 700mm (27.5") Inspection area prior to web guiding and slitting
• Fix splicing facility
• Manual web clamps
• Web guide
• E & L DRS22 electronic web guide.
• Ultrasonic sensor – enables guiding of opaque and clear materials.
• Adjustable web guide sensor.
• +/- 12.5mm (1/2") correction.
• Draw Head
• Silicone nip roller against a driven draw roller.
• The silicone nip roller does not allow labels to attach themselves to it reducing down time.
• Fully adjustable to allow for different label stocks.
• The draw roller is driven by a 1.5Kw (2 hp) motor.
• Slitting
• 3 quick set rotary scissor slitting knives (shear knife).
• Minimum slit width: 16mm (0.62")
• Lateral knife adjustment: +/- 8mm (0.31")
• Removable interlock cutter guard for easy access to the slitting knives and anvils.
• Rewind
• 1 Product rewind
• Maximum rewind diameter: 360mm (14")
• 76mm (3") air mandrel
• Label in / labels out rewinding
• Electromagnetic particle clutch
• The mandrels are quick change
• Count Facility
• Labels
• Linear - metres
• Programmable auto slow down and stop when the count is reached.
• Speed - 250 metres / minute - 820 feet / minute  - dependent on material
• Conforms to CE regulations and all circuits use dual channel safety switches, which are continuously monitored using a certified safety relay.
Optional Equipment
• Second rewind
• Lateral knife separation
• Adjustable splicing table - with pneumatic web clamps
• Extended inspection / splicing table - 1460mm (57.4") Inspection area.
• Drello strobe light
• Razor slitting with lateral adjustment
• Crush cut slitting with 3 knives and lateral adjustment
• Range of air mandrels - 25 to 102mm (1 to 4")
• Additional rotary slitting knives

Daco Solutions Limited
Unit 2, Oldbeck Road, Beverley,
East Yorkshire, HU17 0JW, UK
Tel: 01482 860288 International: +44 1482 860288
Fax: 01482 880942 International: +44 1482 880942
Email: Sales Department