Daco DTD250R Bench Top Die Cut To Register Rotary Die Cutter

The Daco DTD 250R is the perfect re-register die cut unit for utilisation with smaller digital label printing presses.  The DTD 250R re-register die cut machine allows digitally printed webs to be finished quickly and economically. The machine offers the flexibility and high performance often found in much larger and more expensive systems.  Its design includes a quick make ready shear knife slitting box and touch screen control that makes any job quick and easy. 

The Daco DTD 250R bench top die cut to register rotary die cutter is the cost effective solution to the finishing of digitally printed webs.  The re-register rotary die cutter is available with either one or two rotary die stations, rotary slitting and independent tension control for the unwind and rewind. 

• Unwind  
• Maximum unwind diameter: 450mm (18")
• 76mm (3") diameter air shaft
• Merobel electromagnetic particle brake
• Automatic taper tension control
• End of roll function - The user is able to program the roll end diameter – slowdown and/or stop - The system does not use any roll followers or external sensors that can be damaged at roll changes.  The diameter is programmed from the touch screen operator interface.
• Splicing Table
• Fixed splicing table with a slot.
• Self Wound Laminating Station
• Maximum unwind diameter: 450mm (18")
• 76mm (3") diameter air shaft
• Merobel electromagnetic particle brake
• Automatic taper tension control
• End of roll function - The user is able to program the roll end diameter – slowdown and/or stop - The system does not use any roll followers or external sensors that can be damaged at roll changes.  The diameter is programmed from the touch screen operator interface.
• Die Station
• Die cut to register servo drive system - With an accuracy of 0.25mm 0.010") at a constant speed.
• 153 - 406 (6"-16") die repeats.
• Rotometrics through hardened anvil - 84T - 10.5" repeat.
• Gearing - 1/8 cp, 20 degree pressure angle.
• In-feed and exit nip roller.
• Matrix / Waste Rewind - 400mm (15.75") diameter.
• 76mm (3") mechanical mandrel for waste rewind.
• A driven matrix stripping roller with adjustable tension control ensures reliable matrix stripping, enabling high speed running even if the matrix becomes unstable.
• Web guide 
• BST electronic web guide.
• Ultrasonic sensor – enables guiding of opaque and clear materials.
• Adjustable web guide sensor.
• +/- 25mm (1") correction.
• Draw Head
• Fully adjustable silicone nip roller against a driven draw roller.
• The silicone nip roller does not allow labels to attach themselves to it reducing down time.
• Rotary Scissor Slitting
• 3 rotary scissor slitting knives (shear knife).
• Minimum slit width: 13mm (0.51")
• Lateral knife adjustment: +/- 5mm (0.196")
• Razor Slitting
• 3 razor slitting knives.
• Minimum slit width: 10mm (0.39")
• Lateral knife adjustment: +/- 5mm (0.196")
• Rewind
• 1 Product rewind
• Maximum rewind diameter: 360mm (14")
• 76mm (3") air mandrel
• Merobel electromagnetic particle clutch
• Automatic taper tension control
• The mandrels are quick change.
• Labels in / labels out rewinding
• Count Facility
• Labels
• Linear - metres & feet
• Touch Screen Operator Interface
• Shows machine status - system messages, interlocks not met etc
• Quick and easy job set ups
• Counting options
• Tension settings
• Speed - 100 metres / minute - 328 feet / minute  - dependent on material
• Run Hour Meter
• Conforms to CE regulations and all circuits use dual channel safety switches, which are continuously monitored using a certified safety relay.

• 700mm (27.5") diameter unwind with floor standing cabinet
• Lateral knife separation
• Additional rotary die station (no waste rewind or stripping) servo driven
• Upgrade laminating with a waste rewind for laminate backing paper
• Matrix stripping bar
• Upgrade BST web guide with an integral splice table and pneumatic web clamps
• Twin product rewinds
• Pneumatic web clamps for the splice table
• Air mandrels - 25 to 76mm (1 to 3")
• Rotometrics RD scorer - enables edge trim to be wound with the waste matrix
• Additional rotary slitting knives

Download a PDF format brochure

Daco Solutions Limited
Unit 2, Oldbeck Road, Beverley,
East Yorkshire, HU17 0JW, UK
Tel: 01482 860288 International: +44 1482 860288
Fax: 01482 880942 International: +44 1482 880942
Email: Sales Department