Daco Solutions Ltd

Cortadoras de moldes e guilhotinas

Cortadora de Moldes / Rebobinadora com Torre Semiautomática Daco PLD250 / 350

The Daco PLD 250 / PLD350 offers all the benefits of turret rewinding but with very quick make ready times unlike conventional rewinding. This allows shorter runs to be produced both quickly and more efficiently.

The PLD250 / PLD350 is a very efficient rotary die cutter with a semi-automatic turret rewinder for small roll production. Unlike traditional die cutters, where the machine is stopped for a considerable time whilst operators cut and re-apply the web to the cores, the semi-automatic turret is only stopped for a few seconds whilst the turret indexes. New cores are applied to the rewind shaft whilst the machine is in production; the turret automatically cuts the web and applies the web to the new cores.

Many clients are finding that the PLD250 / PLD350 machine is the ideal solution for the production of price gun labels, retail promotional labels and weigh scale labels.

Larguras de folha 250mm (10″) o 350mm (13.75″)

Standard Features of the Cortadora de Moldes / Rebobinadora com Torre Semiautomática Daco PLD250 / 350

  • Desbobinagem
    • Maximum unwind diameter: 700mm (27.5″)
    • Actualização de mandril pneumático: 76mm (3″)
    • Travão com partícula eletromagnética
    • Automatic taper tension control
    • End of roll function – The user is able to program the roll end diameter – slowdown and/or stop – The system does not use any roll followers or external sensors that can be damaged at roll changes. The diameter is programmed from the touch screen operator interface
  • Guia da folha 
    • Guia electrónica da folha
    • Sensor ultrassónico – enables guiding of opaque and clear materials
    • Integral diagonal splice table with pneumatic web clamps
    • Adjustable web guide sensor
    • +/- 25mm (1″) correction
  • Estação de moldes
    • 153 – 406 (6″-16″) die repeats
    • RotoMetrics through hardened anvil – 105T – 13.125″ repeat
    • 16mm (0.62″) thick precision ground die plates
    • Engrenagem – ângulo de pressão 20º, 1/8 cp.
    • A driven matrix stripping roller with adjustable tension control ensures reliable matrix stripping, enabling high speed running even if the matrix rewind becomes unstable
    • Matrix / Waste Rewind -400mm (15.75″) diameter
    • Mandril mecânico de 76mm para bobinagem de desperdício
  • Draw Head
    • Silicone nip roller against a driven draw roller
    • The silicone nip roller does not allow labels to attach themselves to it reducing down time
    • Fully adjustable to allow for different label stocks
    • The draw roller is driven by a 1.5Kw (2 hp) motor
  • Corte
    • 3 quick set rotary scissor slitting knives (shear knife)
    • Largura mínima do corte: 13mm (0.51″)
    • Ajuste lateral da lâmina: +/- 8mm (0.31″)
    • Removable interlocked cutter guard for easy access to the slitting knives and anvils
  • Turret Rewind – 3 Position
    • Max rewind diameter: 340mm (13.38″)
    • 3 x 76mm (3″) diameter quick change air shafts (or 3 of customer choice)
    • Embreagem com partícula eletromagnética do Merobel
    • Automatic taper tension control – automatic tension control
    • Adjustable core positioning device – ensures accurate loading of cores onto the mandrel
    • Automatic roll ejection system – enables easy removal of the finished rolls by the operator
  • Count Facility
    • Etiquetas
    • Linear – metres
    • Abrandamento e paragem automático programável quando atingida a contagem pretendida
  • Velocidade – 150 metres / minute – 492 feet / minute – dependent on material
  • Conforms to CE regulations and all circuits use dual channel safety switches, which are continuously monitored using a certified safety relay

Optional Equipment

  • Modular 1m (40″) unwind
  • Estação para cortar moldes rotativa adicional – para perfuração / punção (não inclui rebobinagem da matriz)
  • Separação lateral da lâmina (unidade rotativa de corte)
  • Bigorna amovível – permite corte à ré e perfuração
  • Controlo cerrado da tensão do olhal para desbobinar
  • Barra de despimento da matriz
  • Mandris pneumáticos – 19 a 76 mm (3/4 ta 3″)
  • Mandris pneumáticos – 19 mm (3/4″) for 350mm (13.75) model only
  • DBS back scorer – permite enrolar o corte da extremidade com a matriz velha
  • RotoMetrics Hydra Jack die pressure gauges.
  • Cilindros de moldes rotativos magnéticos do RotoMetrics
  • Lâminas de corte rotativas adicionais
  • Adaptadores de moldes para utilizar a ferramenta existente –  Edale, KDO (K2) e Mark Andy (outros disponíveis a pedido)