Daco SI Label Inspection / Slitter Rewinder
The Daco SI label inspection rewinder / slitter rewinder offers both flexibility and high performance. The unique design of this inspection rewinder includes a quick make ready rotary scissor slitting unit with knife separation and lateral adjustment. A touch screen HMI operator interface enabling quick and easy job setups, control of the various counting facilities, automatic web advance, taper tension control and end of roll features.
The machines unwind and rewind has taper tension control as standard which enables the tension to be kept at a predetermined tension set by the operator. Adjustment of the tension in relation to the roll diameters is automatically compensated for by the PLC.
A BST electronic web guidance system ensures that the finished rolls are perfectly wound, and an inspection table with adjustable splicing table with pneumatic clamps is also fitted as standard, enabling splices to be made both neatly and easily.
Pneumatic airshafts for both unwind and rewind means that changing the rolls could not be simpler, and a web advance system makes it easy to attach the web to the core when starting a new roll.
- Web widths 330mm (13″) or 410mm (16″)
Standard Features of the Daco SI Inspection / Slitter Rewinder
- Unwind
- Maximum unwind diameter: 762mm (30″)
- 76mm (3″) diameter air shaft
- Merobel electromagnetic particle brake
- Automatic taper tension control
- End of roll function – The user is able to program the roll end diameter – slowdown and/or stop – The system does not use any roll followers or external sensors that can be damaged at roll changes. The diameter is programmed from the touch screen operator interface.
- Web up – the operator can, at the touch of a button on the touch screen operator interface, release the unwind brake to allow for easier webbing up of the machine.
- Inspection Tables
- Inspection Table #1 – 1460mm (57.4″) Inspection area with adjustable splicing facility and pneumatic interlocked web clamps.
- Fault Editing Table #2 – 700mm (27.5″) Inspection area prior to web guiding and slitting with adjustable splicing facility and pneumatic interlocked web clamps.
- Stainless steel topped.
- Web guide
- BST electronic web guide.
- Ultrasonic sensor – enables guiding of opaque and clear materials.
- Adjustable web guide sensor.
- +/- 25mm (1″) correction.
- Draw Head
- Pneumatically operated silicone nip roller against a driven draw roller.
- The silicone nip roller does not allow labels to attach themselves to it reducing down time.
- Fully adjustable via a regulator and gauge.
- On / off feature to allow for easy webbing up of the machine.
- Interlocked so that the machine cannot be started with the nip roller off.
- The draw roller is driven by a 1.5Kw (2 hp) motor to isolate the unwind tension from the rewind.
- Slitting
- 3 rotary scissor slitting knives (shear knife).
- Knife separation – Allows for easy setting of the knife and anvil with the web in place.
- Minimum slit width: 13mm (0.51″).
- Lateral knife adjustment: +/- 5mm (0.196″).
- Dual knife box configuration to allow for razor slitting to be also fitted.
- Rewind
- 1 Product rewind
- Maximum rewind diameter: 457mm (18″)
- 76mm (3″) diameter with quick change air shaft
- Automatic taper tension control
- Merobel electromagnetic particle clutch
- Labels in / labels out rewinding
- The mandrels are quick change. The mandrel size is selected on the touch screen and is electronically compensated for, so there are no gears to change.
- The rewind is driven by a 1.5Kw (2 hp) motor.
- Programmable web advance system
- The web advance delay time is programmable from the touch screen - enables easy attachment of the web to the core when starting a new roll.
- Count Facility
- Labels
- Linear – metres & feet
- Stop on diameter
- Total count
- Batch count
- Auto calculation of slow down and stop irrelevant of web speed.
- TLC – Total length count until reset by the operator.
- Touch Screen Operator Interface
- Shows machine status – system messages, interlocks not met etc
- Quick and easy job set ups
- Counting options
- Tension settings
- Speed – 300 metres / minute – 984 feet / minute – dependent on material
- Run Hour Meter
- Solid construction – built on a 3mm (0.118″) cabinet with a precision ground steel 16mm (0.62″) main plate.
- Conforms to CE regulations and all circuits use dual channel safety switches, which are continuously monitored using a certified safety relay.
Optional Equipment
- Dual product rewinds with independent tension control
- Waste rewinder for the easy removal of large sections of waste material
- Integral roll lifter for the easy loading of rolls
- Missing label detection – 6 or 12 lane
- Static elimination
- Flag detection – if a flag is detected the machine is brought to a controlled stop and the error presented on the fault editing table
- Splice detection – if a splice is detected the machine is brought to a controlled stop and the error presented on the fault editing table
- Drello 5125 strobe light
- Waste rewinder – enables quick removal of large sections of faulty web in tidy manageable rolls.
- 100% label inspection
- Video web inspection
- Closed loop tension control
- Servo drives
- Razor slitting with lateral adjustment
- Air mandrels – 25 to 76mm (1″ to 3″)
- Additional slitting knives
Daco SI Inspection / Slitter Rewinder – PDF Brochure Download