Daco DTR Label Rewinder

The Daco DTR range was introduced as customers were asking for a simple to use low cost label rewinder. A short and simple web path keeps wastage to an absolute minimum and a wide range of options allow you to configure the machine to your exact requirements. 

The machine base platform utilizes mechanical mandrels on the unwind and rewind, the machine has automatic taper tension control on the unwind and also incorporates an end of roll feature.

A choice of razor, rotary or crush cut slitting is available dependent on the material being rewound.

The base machine design does not use a nip roller so at no time is the face of the labels touched, this allows for delicate labels and stocks to be rewound. The machine is ideally suited for the rewinding of perforated labels, RFID's and booklet labels.

The machine is also available with a 100% print inspection system.

Web width 330mm (13") or 410mm (16")

• Unwind
• Maximum unwind diameter: 457mm (18")
• 76mm (3") mechanical mandrel
• Merobel electromagnetic particle brake
• Taper tension control - No roll-followers or external sensors to be adjusted or maintained.
• Splicing Table
• Fix splicing facility
• Rewind
• 1 Product rewind
• Maximum rewind diameter: 457mm (18")
• 76mm (3") mechanical mandrel
• Label in / labels out rewinding
• Count Facility
• Labels
• Linear - metres
• Programmable auto slow down and stop when the count is reached.
• Speed - 175 metres / minute - 575 feet / minute  - dependent on material
• Conforms to CE regulations and all circuits use dual channel safety switches, which are continuously monitored using a certified safety relay.

• Floor standing cabinet  and main plate
• E & L electronic web guide
• E & L electronic guided unwind
• Bi directional rewinding - Forward / reverse rewinding for use with vision systems
• Razor slitting - 3 knives with lateral adjustment
• Rotary slitting with lateral knife adjustment
• Crush cut slitting - 3 Tidland air operated knives with lateral adjustment
• Second product rewind
• Drello strobe light
• Pneumatic web clamps for the splice table
• Mechanical rewind mandrels - 38 to 102mm (1.5 to 4")
• Air mandrel upgrade for the unwind and rewind
• Air rewind mandrels - 25 to 102mm (1 to 4")

Download a PDF format brochure

Daco Solutions Limited
Unit 2, Oldbeck Road, Beverley,
East Yorkshire, HU17 0JW, UK
Tel: 01482 860288 International: +44 1482 860288
Fax: 01482 880942 International: +44 1482 880942
Email: Sales Department