Daco DTR-V Label Rewinder

The Daco DTR-V platform has been developed as a direct result of the need for a true 100% inspection platform. The machine has been developed with several of the leading 100% inspection camera manufacturers, and close consultation with customers.

The machine rewinds in both forward and reverse directions so that re-inspection of the label is possible after a fault is found by the camera system. Once a fault is found the machine comes to a controlled stop and the machine then reverses the fault back to the splice table for correction. The label is then passed back under the camera for re-inspection. Many other systems do not have the ability to re-inspect the defective label, as they do not have the reverse feature. 

Once the roll is error free the roll can then be slit if needed to the desired width. The DTR-V integral counting facility can count in either labels, feet or metres.

Web width 330mm (13") or 410mm (16")

• Bi directional rewinding - Forward / reverse rewinding for use with vision systems
• Unwind
• Maximum unwind diameter: 457mm (18")
• 76mm (3") air mandrel
• Merobel electromagnetic particle brake
• Taper tension control
• Programmable end of roll function -no roll-followers or external sensors to be adjusted or maintained. 
• Web guide
• BST electronic web guide.
• Ultrasonic sensor – enables guiding of opaque and clear materials.
• Adjustable web guide sensor.
• +/- 12.5mm (1/2") correction.
• Splicing Table
• Fixed splicing facility with interlocked pneumatic web clamps
• Rewind
• 1 Product rewind
• Maximum rewind diameter: 457mm (18")
• 76mm (3") air mandrel
• Label in / labels out rewinding
• Count Facility
• Labels
• Linear - metres
• Programmable auto slow down and stop when the count is reached.
• Touch Screen Operator Interface
• Shows machine status - system messages, interlocks not met etc
• Quick and easy job set ups
• Counting options
• Tension settings
• Speed - 175 metres / minute - 575 feet / minute  - dependent on material
• Conforms to CE regulations and all circuits use dual channel safety switches, which are continuously monitored using a certified safety relay.

• Razor slitting - 3 knives with lateral adjustment
• Rotary slitting with lateral knife adjustment
• Crush cut slitting - 3 Tidland air operated knives with lateral adjustment
• Twin product rewinds
• 100% inspection camera system
• Air rewind mandrels - 25 to 102mm (1 to 4")

Download a Daco DTR Vision brochure

Download a PC Industries Guardian PQV brochure

Daco Solutions Limited
Unit 2, Oldbeck Road, Beverley,
East Yorkshire, HU17 0JW, UK
Tel: 01482 860288 International: +44 1482 860288
Fax: 01482 880942 International: +44 1482 880942
Email: Sales Department