Daco D250 Rotary Die Cutter

The Daco D250 / 330 blank label converter utilises either a single or dual rotary die cutting station.  The large 700mm (27.5") unwind with taper tension control and electronic brake keeps roll changes to a minimum.

The machine is a cost effective solution to blank / plain label converting with user friendly features, a short web path keeps wastage to a minimum and a production speed of 150m/minute.  The machine is ideally suited to clients wish to produce plain labels for the growing thermal transfer label market.

• Web widths 250mm (10") & 330mm (13")

• Unwind  
• Maximum unwind diameter: 700mm (27.5")
• 76mm (3") air mandrel
• Merobel electromagnetic particle brake
• Taper tension control - No roll-followers or external sensors to be adjusted or maintained.
• Splice Table - Makes web splicing easier and quicker.  
• Manual web clamps
• Die Station  
• 153 - 406 (6"-16") die repeats.
• Rotometrics through hardened anvil - 120T - 15" repeat.
• Gearing - 1/8 cp, 20 degree pressure angle.
• A driven matrix stripping roller with adjustable tension control ensures reliable matrix stripping, enabling high speed running even if the matrix rewind becomes unstable.
• Matrix / Waste Rewind -400mm (15.75")diameter.
• 76mm (3") mechanical mandrel for waste rewind.
• Draw Head
• Silicone nip roller against a driven draw roller.
• The silicone nip roller does not allow labels to attach themselves to it reducing down time.
• Fully adjustable to allow for different label stocks.
• The draw roller is driven by a 1.5Kw (2 hp) motor.
• Slitting
• 3 quick set rotary scissor slitting knives (shear knife).
• Minimum slit width: 16mm (0.62")
• Lateral knife adjustment: +/- 8mm (0.31")
• Removable interlock cutter guard for easy access to the slitting knives and anvils.
• Rewind
• 1 Product rewind
• Maximim rewind diameter: 360mm (14")
• 76mm (3") air mandrel
• Label in / labels out rewinding
• Pneumatic clutch with independent regulator and gauge
• The mandrels are quick change.
• Count Facility
• Labels
• Linear - metres
• Programmable auto slow down and stop when the count is reached.
• Speed - 150 metres / minute - 492 feet / minute  - dependent on material
• Conforms to CE regulations and all circuits use dual channel safety switches, which are continuously monitored using a certified safety relay.

• Additional rotary die cutting station - for perforating / sprocket punching (does not include matrix rewind)
• Sheeting station with shingle conveyor
• E & L electronic web guide with an ultrasonic sensor
• Semi automatic 3 spindle turret rewinder with auto roll ejection
• Lateral knife separation - rotary slitting
• Removable anvil - enables back cutting and sprocket punching
• Matrix stripping bar
• Twin product rewinds
• Range of air mandrels - 25 to 102mm (1 to 4")
• Rotometrics RD scorer - enables edge trim to be wound with the waste matrix
• Razor slitting - with on the run lateral adjustment
• Additional rotary slitting knives
• Magnetic die cylinders
• Die adaptors to utilise existing rotary dies - Edale, KDO, Dataply & Mark Andy (others available upon request)
• Merobel electromagnetic particle clutch

Download a PDF format brochure

Daco Solutions now have a total solution to plain label production.  For the small runs, we have the table top Daco DTD250 rotary die cutter and the Daco D250 / 330 for the medium to long runs.  For the longer run and high volume we have the Daco DSI 330 / 410 and with non-stop full automation we have the Daco TD - with either one or two rotary die stations, a 1m (40") unwind and a turret rewinder with core and tail gluing with automatic roll ejection.

Daco Solutions Limited
Unit 2, Oldbeck Road, Beverley,
East Yorkshire, HU17 0JW, UK
Tel: 01482 860288 International: +44 1482 860288
Fax: 01482 880942 International: +44 1482 880942
Email: Sales Department