Expo

(English) Daco D250R – Digital Label Finishing System

Daco D250R – Fustellatore rotativo è la soluzione ideale per la trasformazione e la finitura di etichette digitali stampate dalle macchine da stampa per etichette digitali di dimensioni inferiori. Il fustellatore con taglio a registro D250R con unità a fogli opzionale consente di ottenere, con una singola passata, la finitura in bobine o a fogli delle etichette stampate digitalmente.

VANTAGGI

The Daco D250R is the ideal re-register die cutting solutions for smaller digital label printing presses. The D250R re-register die cut machine allows digitally printed webs to be finished quickly and economically. The machine offers the flexibility to either produce labels roll to roll or sheet labels with the optional sheeting station.

The Daco D250R digital label finishing system is a cost effective solution to the finishing of digitally pre-printed webs from machines such as the Primera CX1200, Degrava 8500 and EFI Jetrion type machines. Using the latest in servo drive technology the material can be converted into finished rolls or sheets at speeds of upto 130 metres / minute – 426 feet / minute .

The re-register rotary die cutter is available with either one or two rotary die stations, sheeting station rotary slitting and independent tension control for the unwind and rewind.

CARATTERISTICHE STANDARD

  • Unwind
    • Maximum unwind diameter: 700mm (27.5″).
    • 76mm (3″) diameter air shaft.
    • Merobel electromagnetic particle brake.
    • Automatic taper tension control.
    • End of roll function – The user is able to program the roll end diameter – slowdown and/or stop – The system does not use any roll followers or external sensors that can be damaged at roll changes. The diameter is programmed from the touch screen operator interface.
  • Web guide
    • BST electronic web guide.
    • Ultrasonic sensor – enables guiding of opaque and clear materials.
    • Adjustable web guide sensor.
    • +/- 25mm (1″) correction.
    • Integral splice table with pneumatic web clamps.
  • Die Station
    • Die cut to register servo drive system – With an accuracy of 0.25mm 0.010″) at a constant speed.
    • 153 – 406 (6″-16″) die repeats.
    • Rotometrics through hardened anvil – 84T – 10.5″ repeat.
    • Gearing – 1/8 cp, 20 degree pressure angle.
    • In-feed and exit nip roller.
    • Matrix / Waste Rewind – 400mm (15.75″) diameter.
    • 76mm (3″) mechanical mandrel for waste rewind.
    • A driven matrix stripping roller with adjustable tension control ensures reliable matrix stripping, enabling high speed running even if the matrix becomes unstable.
  • Draw Head
    • Fully adjustable silicone nip roller against a driven draw roller.
    • The silicone nip roller does not allow labels to attach themselves to it reducing down time.
  • Rotary Scissor Slitting
    • 3 rotary scissor slitting knives (shear knife).
    • Minimum slit width: 13mm (0.51″).
    • Lateral knife adjustment: +/- 5mm (0.196″).
  • Rewind
    • 1 Product rewind.
    • Maximum rewind diameter: 360mm (14″).
    • 76mm (3″) air mandrel.
    • Merobel electromagnetic particle clutch.
    • Automatic taper tension control.
    • The mandrels are quick change.
    • Labels in / labels out rewinding.
  • Count Facility
    • Labels.
    • Linear – metres & feet.
  • Colour Touch Screen Operator Interface
    • Shows machine status – system messages, interlocks not met etc.
    • Quick and easy job set ups.
    • Counting options.
    • Tension settings.
  • Speed – 130 metres / minute – 426 feet / minute – dependent on material.
  • Run Hour Meter.
  • Conforms to CE regulations and all circuits use dual channel safety switches, which are continuously monitored using a certified safety relay.

ATTREZZATURA OPZIONALE

  • Closed loop tension control.
  • Re-register sensor for holographic materials.
  • Lateral knife separation.
  • Additional rotary die station (no waste rewind or stripping) servo driven.
  • Sheeting station with shingle conveyor.
  • Self wound laminating station.
  • Upgrade laminating with a waste rewind for laminate backing paper.
  • Matrix stripping bar.
  • Dual product rewinds.
  • Razor slitting – with on the run lateral adjustment and a 10mm (0.39″) minimum slit width.
  • Air mandrels – 25 to 76mm (1 to 3″).
  • Daco DBS back scorer – enables edge trim to be wound with the waste matrix.
  • RotoMetrics Hydra Jack. die pressure gauges.
  • Additional rotary slitting knives.

Daco D250R die cutting in register and sheeting digital labels

Video / Galleria

Non sono attualmente disponibili video


Documenti sui prodotti

Non sono attualmente disponibili documenti

Wayne Trademark Printing and Packaging - Labels, Tags, Folded Cartons and Packaging
McLoone Metal Graphics - metal and plastic nameplates, ID Plates, overlays and labels for commercial and industrial applications
Danro Labels - Price Gun Label Manufacturer
Consolidated Label Co - Print labels for any products and shrink sleeves
CCL Labels
Label Metrics - Direct Thermal & Thermal Transfer Labels
Anglia Labels - UV Inkjet & toner based digital label printers
Lucas Products & Services - Industrial Labelling & Engraved Products specialists, tags, labels, nameplates, plaques, plates
Thermal Printer Services - TPS offer a full range of thermal label printers, barcode scanners, printer repairs, printer labels and ribbons
Positive ID Labels - Flexographic & Digital Label Printing Specialists, Direct Thermal & Thermal Transfer Label Manufacturing

Serve aiuto per la conversione di etichette? Lasciateci illustrare le nostre soluzioni oggi!

Ricevi una quotazione Contattaci